Direct answer: for durable, reliable wet boom nozzle bodies, this selection covers common pipe sizes (1″, 1/2″, 3/4″), multiple nozzle outlets, and nylon construction. These models suit commercial growers, turf applications, and agricultural spraying setups that require easy clamp-on installation and consistent spray patterns. The top picks provide clear sizing, compatibility notes, and straightforward mounting. Below, you’ll find a quick comparison table and in-depth product sections to help you choose the right nozzle body for your wet boom system.
| Product | Pipe Size | Outlet Count | Material | Best For |
|---|---|---|---|---|
| QJ17560A-1-NYB (Pack of 12) | 1″ | Single | Nylon | Large-diameter booms, heavy-duty clamps |
| QJ17560A-1/2-NYB | 1/2″ | Single | Nylon | Smaller booms, lighter setups |
| QJ17560A-3/4-NYB | 3/4″ | Single | Nylon | Balanced mid-size systems |
| QJ363C-1-NYB | 1″ | Three outlets | Nylon | Multiple spray patterns from one body |
| 25775-1T-NYB | 1″ | Single | Nylon | Split eyelet design, clamps onto multiple tubing |
Pack of 12 – Quick TeeJet Single Nozzle Body for Wet Booms
Best for large-scale consolidation: this 12-pack of TeeJet QJ17560A-1-NYB nozzle bodies clamps onto a 1″ pipe and uses a 3/8″ drill hole. Upper clamp bolt size is 5/16″ or M8. Choose this if you operate a high-volume wet boom with uniform single-nozzle outlets and need ready availability for multiple bar sections. Caution: bulk packaging may be more than needed for small systems.
Pack of 12 – Quick TeeJet Single Nozzle Body for Wet Booms – 1/2-Inch Pipe
Best for smaller tractors or lightweight setups: the QJ17560A-1/2-NYB is designed to clamp onto 1/2″ pipe with a 3/8″ drill hole and a 5/16″ or M8 clamp bolt. Best for compact or precision-oriented operations where space is limited and single-nozzle bodies are preferred. Limitation: smaller pipe sizing may limit flow capacity compared to 1″ models.
Pack of 12 – Quick TeeJet Single Nozzle Body for Wet Booms – 3/4-Inch
Best for mid-range systems: the QJ17560A-3/4-NYB matches 3/4″ pipe with a 3/8″ drill hole. It comes in a pack of 12 and uses a similar clamp bolt size as larger models. Choose this if your boom uses 3/4″ piping and you want reliable, uniform nozzle bodies across sections. Limitation: not compatible with 1″ pipe systems unless adapters are used.
TeeJet QJ363C-1-NYB Nozzle Body for Wet Booms
Best for versatile spray patterns: this 1″ pipe nozzle body features three outlets in a single unit, allowing multiple spray patterns from one body. It clamps on to 1″ pipe with an opening of 1 1/4″. This model is suitable for growers needing more than one spray configuration without adding separate bodies. Limitation: more complex assembly can require careful layout planning for even spray distribution.
Spraying Systems QJ17560A-3/4-NYB Quick TeeJet Single Nozzle Body
Best for standardized TeeJet fittings: this QJ17560A-3/4-NYB single nozzle body provides reliable 3/4″ pipe compatibility with a 3/8″ drill hole size. It is well-suited for mid-size booms that require uniform nozzle bodies across sections. Caution: ensure your system uses the 3/4″ piping for proper fitment.
TeeJet 25775-1T-NYB Split Eyelet Nozzle Body for Wet Booms
Best for adaptable tubing: this split eyelet nozzle body clamps onto 1″ pipe and supports various tubing sizes (1-1/4″ to 1-3/8″ O.D.). It is a robust option when you need flexibility in hose routing and quick detachment. Limitation: growth in tubing size may require additional adapters or clamps.
TeeJet 1/2-Inch 3 Outlet Nozzle Body for Wet Booms
Best for multi-outlet efficiency on smaller booms: this model consolidates three outlets into a single 1/2″ body, ideal for compact spraying rigs needing multiple spray points from a single mounting. Caution: lower flow capacity per outlet compared to larger pipe sizes; plan allocation accordingly.
Buying Guide: Key Purchase Considerations
- Pipe size compatibility: choose the correct body to fit your boom’s pipe diameter (1″, 3/4″, or 1/2″).
- Outlet configuration: single-outlet bodies are simple; multi-outlet bodies enable multiple spray patterns without extra fittings.
- Material and durability: nylon bodies balance weight and chemical resistance; check compatibility with your spray solution.
- Clamp and bolt sizing: confirm bolt sizes (5/16″ or M8) for secure installation in your setup.
- Operating pressure: some models specify max PSI; ensure the body suits your system’s pressure range.
- Tubing compatibility: certain designs support specific O.D. tubing; verify if you need adapters for your tubing.
- Packaging: pack sizes vary (single vs. packs of 12); consider maintenance and replacement needs for your operation.
FAQ
- What is a wet boom nozzle body?
A: It is the component that attaches nozzles to a spray boom and exposes a hole for the nozzle, enabling spray distribution over a field or area. - Which pipe size is most common for agricultural booms?
A: 1″ and 3/4″ pipe sizes are widely used, with 1/2″ for smaller or lighter-duty applications. - Do multi-outlet bodies affect spray uniformity?
A: They can improve efficiency by reducing fittings, but require proper layout planning to ensure even distribution across all outlets. - Are nylon nozzle bodies durable for field use?
A: Nylon provides good chemical resistance and lightweight construction, suitable for many spraying scenarios, but verify compatibility with specific solutions. - Should I buy in bulk or individual units?
A: Bulk packs (like 12-piece sets) are cost-effective for larger operations and replacements; single units are better for small, modular setups. - Can these fit existing TeeJet and non-TeeJet systems?
A: Most listed items are designed for common TeeJet configurations; verify clamp sizes and hole diameters if mixing brands.